Step 1: Remove Top Cap
- Carefully tilt the umbrella towards you.
- Remove the cap from the umbrella top.
Step 2: Remove Canopy
- Remove the ribs from the canopy pockets.
- Carefully tilt the umbrella towards you.
- Remove the canopy from the umbrella frame.
Step 3: Prepare Replacement Canopy
- Unfold the canopy.
- Flip the canopy inside out and place your arm under the canopy.
- Locate the hole on top of the canopy and pass 2 fingers through it.
Step 4: Place Canopy
- Carefully tilt the umbrella towards you.
- Place your fingers in the hole on top of the umbrella.
- Flip the canopy over the umbrella frame.
- Place the cap back on the umbrella without fully tightening it.
Step 5: Secure Canopy
- Place each rib back into the canopy pockets
- Carefully tilt the umbrella towards you.
- Tighten the cap completely.
Step 6: Test Umbrella
- Open and close the umbrella to make sure the canopy is properly installed.
