How to videos

Grande Canopy Replacement

Grande Canopy Replacement

Step 1: Remove Top Cap

- Remove the cap from the umbrella top.

Step 2: Remove Canopy Screws

- Using a drill or screwdriver, remove the screws from each rib.

- Using an Allen key, remove the screw that is on the main pole.

Step 3: Remove Canopy

- Open the canopy and remove it from the umbrella frame.

Step 4: Prepare Replacement Canopy

- Unfold the canopy.

- Flip the canopy inside out and place your arm under the canopy.

- Locate the hole on top of the canopy and pass 2 fingers through it.

Step 5: Place Canopy

- Place your fingers in the hole on top of the umbrella.

- Flip the canopy over the umbrella frame.

Step 6: Close Canopy

- Screw the cap back on the umbrella.

- Close the opening using the Velcro straps.

Step 7: Secure Canopy

- Using an Allen key, screw the canopy to the main pole.

- Using a drill or screwdriver, screw the canopy into each rib.

Step 8: Test Umbrella

- Open and close the umbrella to make sure the canopy is properly installed.

Reading next

Fill Up Base Assbembly Instructions
Supreme Umbrella Assembly Instructions